@Dzee
Many of us would like to see the implementation of a Text feature, you are probably aware that this officially said to be ‘in progress’.
From:
I understand that you use an App to the type the required Text, and then take a ScreenShot that is imported into S3D. In the following this is assumed to be correct.
At present [01 August 2020] unless the Text is present as a Body it may be difficult to manipulate and if it is not possible to remove the Background this could also create further difficulties.
In this ScreenShot the H was Sketched [note Closed Sketch] on the X-Y Plane and a Body Extruded to 0.001mm thick.
An Offset Construction Plane was created 174mm from the Origin Plane, and when the H was moved onto the new Plane it snapped into position.
Pages was used to somewhat replicate the H used above and manipulated into position alongside the H Closed Sketch. The H Image was reduced by adjusting the Height Dimension to approximately match that of the H Closed Sketch. Noting the Image Dimension relates ro the Background.
It was possible to place the Image on the Construction Plane, but of course the Offset was known, certainly the sense of snapping was absent. The detail involved is too small to be relevant and was omitted for the sake of clarity:
Perhaps it is worth giving an App capable of producing Text in DXF Format a try?