Hi,

I need to model a 3d spiral spring, or even just a 3d spiral line/path. Can you help , please?

@Ansadek

This is just one way to produce a ‘Spring’ there are others.

**Sketch > Circle** draw a Circle appropriate to the diameter Spring that you need

**Add > Construction Plane > Perpendicular to curve at point** shown here on the right of the Circle

Tap on the Circle to select it’s Face it will turn brighter Blue

Drag the upward pointing Arrow until you have the length of Spring needed [in this case 20 was selected]

**Add > Construction Axis Through a Cylinder or Cone**

Tap on the Cylinder

Tap with your Finger on the Construction Plane if necessary zoom in to be able to place your finger accurately.

This should zoom in on the construction plane.

Draw a Circle representing the Thickness/Diameter of the Material needed for your Spring

Move this Cirle relative to the Construction Axis to provide the Diameter of your Spring

**Tools > Revolve** select the Circle just drawn **Next** select the Axis

Set the Height [top left] to the Length of your Spring and hit

Set the Angle to 3600 [in this case = 10 turns] choosing the your appropriate number and hit

Delete the Cylinder Leaving your Spring.

Greeting,

Here’s another way to create a spiral spring. Sketch a line that represents the center axis.

Draw a circle the diameter of the rod at a distance from the line. That distance is the radius of the spring.

Go to Tools, select Revolve.

Tap the pencil inside the circle (now highlighted). Select Next then tap the line. At the top input box, put in your desired height and then number of turns x 360 (one turn = 360 deg). Done.

-Mike

Unfortunately, what I am trying to model is not a cylindrical spiral (spring), but rather a conical one, as Ivtrued to show in the attached sketch.

I wonder if it can be done via Shaper3d?

Can you please help me.

I need to draw a spring revolving around an arc.

Instead of the spring revolving around a straight axis like shown in the tutorial, I need the axis to be an arc.

How can I do that?

@drkhateeb

In the following use your own dimensions, this is just one way to convey the method to achieve the objective. The actual dimensions used in this example can be better viewed by tapping on an the image to expand.

Sketch the Diameter of the Material to be used to create the Spring, Sketch a Vertical Line about which to Revolve the Circle created:

Use **Tools > Revolve** to create the Diameter of the Coil Spring and then give it the required height by typing in the appropriate dimension:

Sketch a Circle that passes through the Coil Axis as shown. Use **Transform > Move/Rotate** > and drag the Pivot Point to the centre of the. Circle:

Ensure that the Icon is Selected and drag to create the first Copy, then the second Copy and so on:

Use **Tools > Union** to finish the Spring.

Thank you very much. Very helpful. It worked perfectly. Much appreciated

@drkhateeb

Thanks for your response it is useful to hear what has worked for others.

I am using this opportunity to improve my input by adding to the overall information regarding Helix on various Paths.

If there is a requirement to have a less pronounced Curve the Radius of Curvature can be increased. This will naturally reduce the Copying Angle as demonstrated in the following:

The Angle Lines being centred on the Faces of the Helix and providing the Angle to use for Copying.

This Link aims to tie together similar Threads: