If you feel that the software needs something new: post it here. We’re open to every idea - even the most unlikely!

I have not used this feature on other software so I don’t know how it works, I imagine making a body, draw lines for seams and select edges to be bent and thickness of material for something like a box. But will also need the function to do the same with a cone or megaphone like shape that would be rolled with a slip roll. Say, years down the road, is there any possibility of an image trace like tool, or a G-code post processor?

[image] Add existing design into current without export-import, just insert … Thank you

Is it possible to have an option for the dimensions bubble to appear to the right of the pen tip instead of the left? I always seems to have to twist my hand to see how much I have moved or drawn something.

Not sure if I am experiencing a somewhat similar problem with the cut/subtract (extruding)? I wish to pull the sketch up to subtract a slot from the arc extrude by 1mm, then repeat this “below” the sketch to do the same, thus having a 2mm slot that is in the exact middle of the arc (as if I’d used a ‘from mid-plane’ cut of 2mm…. feature request perhaps?). It allows me do it on top, ( by default it correctly sets extrude command to subtract) but it will not do it below. Even if I try the other options of ‘new body’ etc (which I know wouldn’t give me the result I want) nothing happens. The even stranger part is that you can see it does carry out the desired subtract on the other arc body behind the one I’m working on? Hope the video helps. Thanks in advance.

Just hide the sketch temporarily. Then proceed with the extrude.

[image] Algunos problemas Need help? We are here. Uploading: 20210619_155126000_iOS.mp4… Buenas a todos, escribo este hilo para mostrar algunos de los problemas que veo a diario usando la aplicación en mi ipad pro 2020, algunos de ellos son como tiempos de cargas ridículamente largos para piezas simples como una mesa perforada (lo cual si se implementara un menú para generar algunos patrones típicos como hexágonos, taladros… se ahorraría además de tiempo haciendo copiar y pegar, se reduce notablemente el gasto de recursos de hardware)(al igual… [image] Sketch chamfer/fillet function Need help? We are here. Are there any plans for Shapr3D to add the sketch chamfer/fillet function in the future? This feature will greatly improve the efficiency of sketch drawing, thank you!

Hi @TigerMike, Thanks for suggestion. I am subtracting from the outer bodies, not extruding a new body - so if I hide the sketch then I have nothing to ‘extrude’ cut down into the bodies.

In my opinion some features, such as subtract, really needs an overhaul. I most often end up using intersect and delete, so there is a reason I do that.

In this case I use replace face but it would be super cool to see a tolerance option window there, to pre-set applicable tolerance on part before Done. Let’s say on the “blue”(face to replace)surface, not “red” target surface.

I wish we could see a show/hide sketch option window near highlighted sketch item instead of “travelling out west” for items. Onshape use is two-finger tap for option menu.

Any feature ideas?

Workshop Modeling Questions

wigarga February 4, 2022, 6:30pm 662

Topic		Replies	Views
What should be the next feature? Modeling Questions	90	12134	December 22, 2023
What new features in Shapr3d would close the gap up to the big guys? Modeling Questions	65	6376	November 1, 2023
Share your creations Share your creations	273	57169	June 9, 2025
Features for laser cutting design Modeling Questions	30	6028	August 19, 2021
Dimensioned drawings - Tell us how you need it Modeling Questions	98	17076	July 14, 2022

Any feature ideas?

Related topics